skip to Main Content

Tips for maintenance of the plumbing system

Here are 5 useful tips for maintaining the plumbing system

Tips for maintenance of the plumbing system. To begin with, almost every homeowner experiences a plumbing problem from time to time.
The plumbing system in your home is a complex system that brings fresh water, heats it for washing and distributes it throughout the house. Easy access to fresh water and sanitation is so common that it’s easy to take it for granted, at least until something goes wrong.

Fortunately, it is not too difficult to take care of your plumbing system and avoid the most common plumbing problems, such as water leaks, broken and rusty pipes and clogs. Most fixtures will last a long time – sinks and toilets can last decades.

These tips for maintenance will help you keep your plumbing system in good shape, to avoid headaches and the inconvenience of unexpected problems. Consequently, call a plumber for maintenance of the plumbing system.

1. Don’t wash it

The only thing you should throw down the toilet are your waste and toilet paper. A toilet bowl is not a garbage can, so things like sanitary products, cotton swabs, plastic, hair, and cardboard can build up in the line and cause a bad clog. Unless you want to pay a professional plumber big bucks to pull a nasty surprise out of your sewer, put a bin in the bathroom and use it.

2. Check for leaks from the food coloring reservoir

Is your water tank leaking into the bowl? Try it by putting a little red food colouring in the tub and waiting about an hour. So if at that point it has leaked into the bowl, it is necessary to replace the sphere of the tank to prevent the water from escaping and to lower the water bill.

3. Stop an overflowing toilet in its tracks

Is there something more to make your hair stand on end than watching the water level slowly rise in the cup of water? If you think it might overflow, open the tank and push the drain valve down. This will stop the water and save you time to tackle the plumbing problem.

4. Clean a blocked toilet with soap

Don’t have a plunger? You don’t need it to clean a clogged toilet. You can often get rid of the blockage by adding hot soapy water to the bowl. Take the hottest water you can from the tap and add as much as possible to the bowl until it is full. Add liquid soap, and don’t be shy – you can’t add too much. The hot water will help to break down the hoof and the soap will help it get back into motion.

5. Check regularly for leaks

Leaking taps and running toilets can cost you hundreds of water bills. Repairing them is usually easy and can save you a lot of money. Remain diligent in repairing them. Many causes of plumbing leak, such as corroded and rusted pipes, don’t all occur at once. Regularly inspect exposed pipes in your home for signs of damage or decay. Rust, deformation and drops of water on the outside of the pipes all indicate a problem that an experienced plumber should face.

You rely on your home plumbing every day, so take the time for plumbing maintenance. A little basic care can go a long way. Therefore, in protecting your plumbing from clogs and preventing leaks and water damage.

And in case you have a Brighton Plumber’s Home Guarantee, you’ll enjoy added peace of mind. Our plans cover parts and components of the plumbing system in your home, so you will be prepared when the unexpected happens.

Contact our customer service team by calling 01273004125.

This Post Has 0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *